Smith, who is from California, is in charge of fiberglass sleeve, and the purchase of fiberglass sleeve has been smooth sailing over the years. For the last glass fiber tube order, the parameters were normal when the glass fiber tube was tested for the first time to confirm the sample, but there was oil leakage in the second glass fiber tube test. . Smith communicated with the glass fiber sleeve manufacturer many times to no avail. The other party said that this is a traditional sealing process for glass fiber sleeve. Either accept or cancel the order. Smith knows that the delivery time confirmed with the customer is still one month, and he urgently needs to find a glass fiber sleeve. Replace it with the tube manufacturer.

Smith has consulted no less than 20 glass fiber sleeve factories for the sealing process, all of which use traditional weaving and coating methods. Smith knows that although this method is simple to operate, it requires very high tightening torque. The sleeve is easy to leak. In order to prevent leakage, some glass fiber sleeve manufacturers apply anaerobic adhesive on the thread. During operation, the particles of the anaerobic adhesive fall into the valve hole, causing oil pollution of the glass fiber sleeve or valve stuck. ( silicone tube)

The delivery date is approaching day by day, and the glass fiber sleeve manufacturer has not yet implemented it. Smith is anxious and asks around. His friend Caleb gave the contact information of Shunbo fiberglass sleeve. Caleb is also our glass fiber sleeve customer in the United States. He suggested that he contact AAK and told him that Shunbo fiberglass sleeve is exported to European and American markets all the year round, and has some unique research and development processes of his own. , Perhaps in the sealing process of glass fiber sleeve, Shunbo will be different. ( PET braided sleeve)

Smith directly sent the glass fiber sleeve drawings and asked that traditional sealing techniques could not be used. After a week, Shunbo successfully sent the glass fiber sleeve samples. Two weeks later, Smith emailed Shunbo's glass fiber tube to inform Shunbo that the parameters were fully up to standard after 3 tests, and there was still no leakage in the 4th and 5th tests.

Smith is very curious about how Shunbo's glass fiber tube is different from other manufacturers in the sealing process?

1. The glass fiber tube is benchmarked against the international first-line brands, and the proofing is 1~3 times, and the standard must be met within 3 days

2. Using proprietary formula technology, 30% more than the peers complete the delivery, and at the same time meet the personalized customization.

3. The quality of the whole series of glass fiber sleeve is among the top three in the industry, which is an existing fact that does not need to be questioned.

Shunbo fiberglass tube is synchronized with Swiss technology, no pollution and no leakage. You might as well have a try!

Tel: 18118749872

Email:Laura@sunbowgd.com