Sunbow FEP heat-shrinkable tube can meet personalized customization, and there is no second company in China. Other peers can only look up and can't match, choose Sunbow, you will never regret it!!!

1.7 times shrinkage of FEP heat shrinkable tube, the minimum specification that can be made in the industry is Ф2.0mm, sleeves smaller than this size are all non-standard customization, such as inner diameter Ф1.5mm, because this specification is very thin, also known as Capillaries, as the name suggests, are as thin as hair, which shows that their production technology and process requirements are high. However, most manufacturers in the market cannot produce FEP heat shrinkable tubes with such a small inner diameter due to limited technology and production equipment. When the customer needs this type of capillary, it cannot be matched, and can only be replaced by the conventional 2.0mm size. Improper size will lead to gaps or air bubbles between the shrinkage effect and the product, greatly reducing the service life of the product, and even reducing the insulation and sealing of the product, thus burying a safety hazard, which has also become a major problem for such customers. Pain points.

A well-known domestic air-conditioning company needs to use a special customized FEP heat-shrinkable tube on the lead wire of the temperature/humidity sensor resistor to protect against moisture. It has strict requirements on the inner/outer diameter, and the inner diameter before shrinkage is only Ф1. 5mm, less than Ф0.25mm after shrinkage, and the wall thickness is required to be 0.1mm. The customer has found many heat shrinkable tube manufacturers, either the price is very expensive and the quality is unstable, unable to meet the size requirements of the product, or the performance cannot meet the standard. Due to the particularity of the material, the customer's new project has been in a stagnant state, the customer contacted us Sunbow through the recommendation of other manufacturers, after understanding the customer's use environment, products and special requirements. After evaluating the process technology, it can be produced to meet the needs of customers, and a special team is immediately established. After the customization of special molds, the verification and adjustment of process technology, the samples that can meet the needs of customers are made on the third day. After receiving the samples, the customer is very satisfied that the pass rate is 100% after small batch trial production and related performance verification. All the indicators of Sunbow's FEP heat shrinkable tube perfectly meet the customer's use requirements. Through 3 months of cooperation, Sunbow's product quality and service have been recognized by customers, and they have been accepted as the only designated supplier of casing.

As a powerful manufacturer of FEP heat shrinkable tubes, Sunbow has been committed to the research and development and production of FEP heat shrinkable tubes. The product specifications are complete to meet the needs of various specifications of customers. The product quality is stable, and it can quickly provide the best solution for the products applied by customers. And it has a senior R&D technical team, which can quickly provide high-quality products to meet customer needs according to customer needs. Sunbow FEP heat shrinkable tube can meet personalized customization, and there is no second company in China. Other peers can only look up and can't match, choose Sunbow, you will never regret it!!!