SUNBOW Fiberglass Sleeve SB-SGS-40 is similar to the SG-240 of Big Mac Delfingen. There is almost no difference in technical performance, but in terms of price and delivery time, SUNBOW Fiberglass Sleeve SB-SGS-40 has obvious advantages. Advantage. After comparing and testing the SUNBOW fiberglass ferrule SB-SGS-40 with the SG-240 of DELFINGEN, Anxno Connector officially listed SUNBOW as a third-tier supplier.

In the design of insulating sleeves for high-end connectors, DELFINGEN's SG-240 series is the first choice in the world, because DELFINGEN has monopolized this field for too long. Their SG-240 is also 4.0KV. It is a height that is difficult to reach for insulating sleeves. Because the insulating sleeve has a layer of glass fiber yarn, theoretically adding glass fiber yarn will increase the temperature resistance, and DELFINGEN's SG-240 can even reach 7.0KV. With high tear resistance and high insulation, the choice of spear and shield has appeared again. It is indeed not easy to do domestic fiberglass sleeves.

The fiberglass sleeving used in the wire harnesses produced by Anxono connectors has always been the insulating material of DELFINGEN. Due to the unit price and delivery time, we have been looking for alternatives. Tested a number of glass fiber bushings in China, and the glass fiber bushings with a withstand voltage above 4KV cannot meet the design requirements. Until I happened to see SUNBOW glass fiber sleeve SB-SGS-40 on the pipe network, after the engineers of Anxino received the sample test sent by us, the performance parameters of SUNBOW glass fiber sleeve were infinitely close to the SG of DELFINGEN. -240, the test results are very satisfactory to the engineers of Anxono, and then SUNBOW is listed as the third-level supplier, and informed that the SG-240 and other stocks of DELFINGEN will be imported into the third-level supplier of SUNBOW as soon as the inventory is used up. This process will be completed within a month. ( PET braided sleeve)

For such a super tear-resistant fiberglass sleeve, to achieve high insulation and high wear resistance, it cannot be achieved by changing the raw materials alone, and SUNBOW's exclusive formula must be used. But how much? How to calculate? The peers have not yet calculated a feasible formula, and they are all using trial and error methods. The SUNBOW fiberglass sleeve has its own patented distribution method, which can accurately calculate the optimal weight of each material. SUNBOW uses the calculation method, using automatic equipment to mix rubber, automatic operation, non-manual way of watching electronic scales, reducing human errors, and the mixing of each batch of glass fiber sleeves has reached a near-perfect state. ( PVC tubing)

The current glass fiber sleeve series has a breakdown voltage above 4.0KV and 7.0KV, far exceeding DELFINGEN's SG-240. In the near future, we will also develop higher voltage fiberglass sleeves. All connector design engineers, please pay more attention to our research and development process. SUNBOW fiberglass casing, welcome to try it out!