SUNBOW fiberglass Sleeving not only has good product quality, high temperature resistance and high breakdown voltage resistance, but SUNBOW factory pays more attention to production process, focusing on customer needs, and has been continuously improving production equipment and production technology for many years, and finally SUNBOW factory The glass fiber Sleeving joints produced are 30% less than those of the peers. The Danish customer used the glass fiber Sleeving that praised SUNBOW and chose SUNBOW to place an order.

There are quite a lot of companies selling fiberglass Sleevings in China, but there are not many manufacturers who really have production strength and have their own factories to produce fiberglass Sleevings. Most of them are traders, not to say that traders are not good, but some Traders do not understand this insulating sleeve very well, and the quality of the product is not enough just to look at the appearance. The quality of the glass fiber Sleeving material, weaving machine or weaving speed, and the oil adjusted according to the formula will greatly affect the quality of the glass fiber Sleeving. The price confusion of glass fiber Sleevings on the market is mainly due to the different quality of glass fiber Sleevings on the market, which is the main reason why customers are mostly surprised by the price difference of glass fiber Sleevings. ( PET braided sleeve)

Last Tuesday, a Danish customer came to SUNBOW to consult glass fiber Sleevings through the introduction of his friend. It is understood that this customer has just received the goods from other suppliers. He thought that his production line was receiving the goods. After that, the production can start. However, during the production process, due to the large number of glass fiber Sleeving joints, several of his machines were automatically powered off many times. It turned out that the customer would directly use the machine to cover the glass fiber Sleeving during the production process. , if it encounters fiberglass Sleeving joints, the machine will automatically suspend work. The customer said that he bought too many fiberglass Sleeving joints, and the machine stopped at every turn, which was time-consuming and labor-intensive, so he wanted to repurchase a batch of fiberglass Sleevings with fewer joints, so he found it through the introduction of a friend SUNBOW Factory.

Indeed, the number of fiberglass Sleeving joints produced by SUNBOW factory is less than half of its counterparts. This is because SUNBOWuses a fixed-length yarn beating machine. This production equipment can greatly reduce the chance of joints arising from the yarn beating process. Therefore, The SUNBOW factory produces few fiberglass Sleeving joints. The customer tried a small order, bought 6 rolls and went back to try it out. As a result, the customer found that Sunbow's fiberglass Sleeving joints were really much less than what he had bought from other suppliers before, so the customer decided to use them in the future. Order Sunbow's fiberglass tube, although a little more expensive, but the product quality is good! ( PTFE sleeving)

Three advantages of choosing Sunbow

1. The SUNBOW factory has more than 600 fully automatic high-speed knitting machines, with zero manual errors and guaranteed quality.

2. SUNBOW raw material yarn insists on using the best quality, and pays more attention to product quality, so that customers can use it more at ease.

3. All series of SUNBOW fiberglass Sleevings have environmental protection certification and flame retardant certification, while most domestic counterparts only have certification for white fiberglass Sleevings, SUNBOW products are more trustworthy.

Why not coming to SUNBOW factory to try a sample order?