Relying on a series of high and low temperature resistance, chemical resistance and voltage resistance, Sunbow PTFE tube has reached cooperation with many first-line brands, such as Huawei, ZTE, Weilai Automobile, etc., and has no quality complaints for 8 consecutive years. , The application on robots has prolonged its service life. It can be said that there are no competitors in China.

The high-temperature-resistant transparent tubes on the market can basically be divided into two categories. One is PFA tubes. The life span is about three or four years, and they will volatilize and solidify, which will cause the insulation function to fail, and the equipment will be down and severely burned. Chips and other components; the second category is PTFE tube, but the market is mixed, rarely can improve its service life. Only Sunbow PTFE tube can perfectly overcome the above pain points. It has high insulation, non-curing, non-volatile, and the size can be customized according to the needs. This is an existing fact.

Last year, Vietnam’s leading robot high-tech toy manufacturer found SUNBOW consulting insulating sleeves. They are developing a new type of fighting robot toy called RoboFi. The toy will be put on the market in 2020 and the sales volume is expected to be 100 in 2020. Million sets. It is required to be able to replace PFA pipes with a tensile yield strength of not less than 11Mpa and a service life of not less than 6 years. High-end robot equipment requires high and low temperature resistance, high pressure resistance, corrosion resistance, and excellent electrical properties. Therefore, we recommend similar PTFE tubes.

We have encountered many such problems when receiving customer inquiries. For example, the tube is volatile and deflated, and the service life is basically about four years. This type of product is not strictly an insulating sleeve. We assure our customers that Sunbow PTFE tube will not be cured within six years, and its service life will definitely exceed the service life of the equipment. Seeing that we are so sure, customers are still skeptical. The customer’s project design cycle is relatively short. We recommend that customers perform accelerated high temperature aging tests. The performance of the product will be known within one month.

The aging test best explained the problem, and the customer accepted it. The test condition is high temperature 260°, lasting 720 hours, the judgment standard is no curing, the change of insulation coefficient, linear expansion coefficient, etc. does not exceed 5%. Compared with the peers, they are positioned in the range of 10%. Sunbow is more strict and confident .

One month later, the test was completed. The customer checked that the PTFE tube was still tubular, while the PFA tube was cured. The next test found that the flame retardant rate and other changes were less than 5%. The test results were amazing and the performance was extremely stable. Since then, Sunbow PTFE pipe has entered the customer supply system, and there has been no quality problem since the supply.

If you want to find a high-quality, stable and reliable insulating sleeve supplier in China, Sunbow is the first choice.